How to Oil the Filter Press Chain

Correct oiling of the filter press chain can effectively reduce wear, extend service life, and maintain the normal operation of the equipment. The following are detailed oiling steps and precautions.

Purpose of Chain Oiling

Reduce friction: reduce wear between chain and sprocket, improve transmission efficiency.
Prevent rust: lubricating oil can form a protective film to prevent the chain from getting damp and rusting.
Reduce noise: reduce vibration and noise during chain operation.
Extend service life: reduce chain fatigue and increase service life.

Preparation Before Oiling

Before oiling the filter press chain, the following preparations need to be made:

Tool preparation: prepare the oiling gun, lubricating oil, and clean rags. Make sure the oiling gun is clean and unobstructed, without blockage or leakage.
Stop inspection: Stop the filter press and make sure it is in a stable state. Then, check the chain transmission system to see if the chain tension is appropriate and whether the chain is damaged or excessively worn.
Cleaning: Use a clean rag to wipe the chain and sprocket to remove dirt and impurities on the surface. This ensures that the lubricant adheres better to the surface of the chain and has a better lubrication effect.

Specific Steps for Oiling

Choose the oiling point: Choose a suitable oiling point, usually above the chain. Avoid oiling at the joints of the chain and the sprocket to avoid contamination or splashing of the lubricant.

Turn on the grease gun: Pour the lubricating oil into the grease gun and make sure the amount of oil is appropriate. Then, turn on the switch of the grease gun and the lubricating oil will flow out of the gun.

Grease filling process: Aim the grease gun at the top of the chain to fill the chain. Pay attention to controlling the speed and flow of the grease-filling to avoid splashing or overflowing the lubricating oil. During the grease-filling process, you can gently turn the chain to evenly apply the lubricating oil to all parts of the chain.

Observe the oil level: When there is enough lubricant on the chain surface, stop filling the oil. Then observe the oil level of the chain to ensure that the oil is moderate. Too much lubricant may cause overflow and waste, and too little lubricant cannot provide a good lubrication effect.

Inspect and clean: After filling the oil, check whether the chain and sprocket are clean and free of debris. If necessary, wipe off excess lubricant with a clean rag to keep the equipment clean.

Precautions

When filling the filter press chain with oil, pay attention to the following points:

Use appropriate lubricating oil: Select the appropriate lubricating oil according to the model and use the filter press’s requirements to avoid using mismatched lubricating oil to cause equipment damage or reduce service life.

Control the amount of oil filling: The amount of oil filling should be moderate, not too much or too little. Too much lubricating oil will cause waste and environmental pollution, and too little lubricating oil will not have a good lubricating effect.

Regular inspection and maintenance: Check the wear and lubrication of the chain regularly. If any abnormality is found, it should be handled in time. Oil the chain regularly to keep it in good lubrication condition.

Operator training: Operators should undergo professional training and be familiar with the structure and operating procedures of the filter press. Be careful and cautious during the oil filling process to ensure the accuracy and safety of the operation.

Keep the equipment clean: Before oiling, make sure the rag is clean and free of impurities to avoid bringing dirt or impurities into the chain and causing wear or blockage. After oiling, clean up the excess lubricant and keep the equipment clean.

Follow the manufacturer’s instructions: When using the filter press, follow the recommendations and precautions in the manufacturer’s instructions. Different models of filter presses may have different oiling requirements and operating specifications, so read the manual carefully and operate as required.

Maintenance records: It is recommended that operators record detailed information for each maintenance and oiling, such as date, operator, type and quantity of lubricant, etc. This helps track the maintenance history and maintenance needs of the equipment and ensure that the equipment is properly maintained and managed.

How to Oil the Filter Press Chain